Retractable Energy Towers
Multi Utility Energy Distribution Units
Semi Automatic Retractable Energy Towers
The retractable energy towers are multi utility energy distribution units, designed to suit your individual requirements, and are available with various combinations of services such as electricity, telephone, compressed air and water. They are commonly used in places typically used for parking or pedestrian areas, along with as market areas and places for concerts and similar events.
Take a look at our range below.
Our Range of Energy Towers
We are delighted to introduce our selection of retractable energy towers: 3020, 4030, 4040, 6040, and 8050. These models are the outcome of over 40 years in access control, with two decades specifically focused on bollards. Each tower is designed to provide complementary services such as electricity, telephone communications, compressed air, and water, making them versatile solutions for a variety of applications.
3020: This semiautomatic energy tower is compact yet powerful, making it an ideal choice for parking areas, pedestrian spaces, and occasional event locations. The 3020 eliminates the need for laying cables and tubes, thus enhancing user safety. It allows the installation of single and/or three-phase 16A electrical sockets, complying with EN 60301-1 and EN 60301-2 regulations. Its top cover plate adheres to UNI EN 124 regulation with load class C250.
4030: The 4030 semiautomatic energy tower steps up the scale in terms of size and capacity. It carries all the beneficial features of the 3020, but with increased robustness, making it a perfect fit for larger areas. This tower also permits the installation of single and/or three-phase 16A electrical sockets, aligning with EN 60301-1 and EN 60301-2 standards.
4040: At the mid-range, the 4040 semiautomatic energy tower offers a blend of size and performance. This tower not only allows the installation of single and/or three-phase 16A and 32A sockets but also goes a step further to accommodate a 63A capacity. With load class D400, it’s compliant with UNI EN 124 regulations.
6040: This semiautomatic energy tower offers enhanced services in a sleek design. The 6040 provides for multiple installations of single-phase and/or three-phase 16A and 32A, in line with EN 60301–1 and EN 60301–2 regulations. Its driveway cover plate complies with UNI EN 124 regulations with load class D400, enhancing its safety and durability.
8050: At the top of our range, the 8050 semiautomatic energy tower delivers the most power and utility. Its larger size accommodates multiple installations of single-phase and/or three-phase 16A and 32A, according to EN 60301–1 and EN 60301–2 regulations. The cover plate is compliant with UNI EN 124 regulations with load class D400, ensuring it can withstand heavy loads.
Gaspo 254: The Gaspo 254 lift assisted manual rising power supply unit allows for installation of two single-phase sockets in 16A. The rising energy unit comes with a traffic resistant cover and is easily operated with a special key. The tower is 200mm diameter and 485mm high.
Our retractable energy towers provide a reliable and efficient way to supply various services while ensuring user safety and minimising clutter from cables and tubes. Regardless of the size of your space, we have a model that will meet your needs.
Our range of energy towers
Gaspo 254
The Gaspo 254 lift assisted manual rising power supply unit allows for installation of two single-phase sockets in 16A. The rising energy unit comes with a traffic resistant cover and is easily operated with a special key. The tower is 200mm diameter and 485mm high.
Macs 3020
The MACs 3020 semi automatic rising power distribution units allow for installations of single-phase sockets and/or three phase sockets in 16A in accordance with EN 60301-1 and EN 60301-2 regulations and related protective circuit breakers.
Macs 4030
The MACs 4030 semi automatic rising power distribution units allow for installations of single-phase and/or three-phase sockets in 16A in accordance with EN 60301-1 EN 60301-2 regulations and related protective circuit breakers. The unit coverplate is in compliance with UNI EN 124 regulations with load class C250.
- Socket IEC309 – 220V 16A 2P+T – IP66 with Magnothermal switch 1P+N 16A 6KA
- Interblock Socket IEC309 – 220V 16A 2P+T – IP66 with Magnothermal switch 1P+N 16A 6KA
- Socket IEC309 – 380V 16A 3P+N+T – IP66 with Magnothermal switch 4P 16A 6KA
- Interblock Socket IEC309 – 380V 16A 3P+N+T – IP66 with Magnothermal switch 4P 16A 6KA
Macs 4040
The MACs 4040 energy distribution units are semiautomatic, with gas actuators for easy lifting. The energy towers allow for installations of single-phase and/or three-phase sockets in 16A, 32A and 63A in accordance with EN 60301-1 EN 60301-2 regulations and related protective circuit breakers. The rising power supply unit coverplate is in compliance with UNI EN 124 regulations with load class C250 or D400.
- Stainless Steel or Iron Painted Tower with 25,000KG Coverplate
- Stainless Steel or Iron Painted Tower with 40,000KG Coverplate
- Stainless Steel or Iron Painted Tower with 40,000KG Fillable Coverplate
- Steel with Anticorrosive Treatment
- Stainless Steel
- Stainless Steel Waterproof
- Stainless Steel Waterproof with Immersion Pump
- Socket IEC309 – 220V 16A 2P+T – IP66 with Magnothermal switch 1P+N 16A 6KA
- Interblock Socket IEC309 – 220V 16A 2P+T – IP66 with Magnothermal switch 1P+N 16A 6KA
- Interblock Socket IEC309 – 220V 32A 2P+T – IP66 with Magnothermal switch 1P+N 32A 6KA
- Interblock Socket IEC309 – 220V 63A 2P+T – IP66 with Magnothermal switch 1P+N 63A 6KA
- Socket IEC309 – 380V 16A 3P+N+T – IP66 with Magnothermal switch 4P 16A 6KA
- Interblock Socket IEC309 – 380V 16A 3P+N+T – IP66 with Magnothermal switch 4P 16A 6KA
- Interblock Socket IEC309 – 380V 32A 3P+N+T – IP66 with Magnothermal switch 4P 32A 6KA
- Interblock Socket IEC309 – 380V 63A 3P+N+T – IP66 with Magnothermal switch 4P 63A 6KA
- Telephone Configuration RJ45 – 3M Connection Line
- Water Configuration with water cock with quick connection – 3M Flexible Tube
- Compressed Air cock with quick connection – 3M Flexible Tube
Macs 6040
The MACs 6040 energy distribution units are semiautomatic, with gas actuators for easy lifting. With the cover opening 90⁰, the design of the units allows for the cover to be closed during use. The rising power supply units allow for installations of single-phase and/or three-phase sockets in 16A and 32A in accordance with EN 60301-1 EN 60301-2 regulations and related protective circuit breakers, and with a coverplate that is in compliance with UNI EN 124 regulations, with load class D400.
- Socket IEC309 – 220V 16A 2P+T – IP66 with Magnothermal switch 1P+N 16A 6KA
- Interblock Socket IEC309 – 220V 16A 2P+T – IP66 with Magnothermal switch 1P+N 16A 6KA
- Interblock Socket IEC309 – 220V 32A 2P+T – IP66 with Magnothermal switch 1P+N 32A 6KA
- Socket IEC309 – 380V 16A 3P+N+T – IP66 with Magnothermal switch 4P 16A 6KA
- Interblock Socket IEC309 – 380V 16A 3P+N+T – IP66 with Magnothermal switch 4P 16A 6KA
- Interblock Socket IEC309 – 380V 32A 3P+N+T – IP66 with Magnothermal switch 4P 32A 6KA
- Telephone Configuration RJ45 – 3M Connection Line
- Water Configuration with water cock with quick connection – 3M Flexible Tube
- Compressed Air cock with quick connection – 3M Flexible Tube
Macs 8050
The MACs 8050 energy distribution units are semiautomatic, with gas actuators for easy lifting. With the cover opening 90⁰, the design of the units allows for the cover to be closed during use. The rising power supply units allow for installations of single-phase and/or three-phase sockets in 16A and 32A in accordance with EN 60301-1 EN 60301-2 regulations and related protective circuit breakers, and with a coverplate that is in compliance with UNI EN 124 regulations, with load class D400.
- Socket IEC309 – 220V 16A 2P+T – IP66 with Magnothermal switch 1P+N 16A 6KA
- Interblock Socket IEC309 – 220V 16A 2P+T – IP66 with Magnothermal switch 1P+N 16A 6KA
- Interblock Socket IEC309 – 220V 32A 2P+T – IP66 with Magnothermal switch 1P+N 32A 6KA
- Socket IEC309 – 380V 16A 3P+N+T – IP66 with Magnothermal switch 4P 16A 6KA
- Interblock Socket IEC309 – 380V 16A 3P+N+T – IP66 with Magnothermal switch 4P 16A 6KA
- Interblock Socket IEC309 – 380V 32A 3P+N+T – IP66 with Magnothermal switch 4P 32A 6KA
- Telephone Configuration RJ45 – 3M Connection Line
- Water Configuration with water cock with quick connection – 3M Flexible Tube
- Compressed Air cock with quick connection – 3M Flexible Tube
For A FREE Quote Or To Discuss Your Next Project
Please Call 0161 320 6462
Macs 3020
The MACs 3020 semi automatic rising power distribution units allow for installations of single-phase sockets and/or three phase sockets in 16A in accordance with EN 60301-1 and EN 60301-2 regulations and related protective circuit breakers.
FEATURES
Tower Material
S235JR Normal Steel
Tower Dimension
300x200mm
Tower Height
600mm
Tower Finish
Anticorrosion Treatment – Color Yellow
Connection Line Couple Out of the Tower
Standard 3m (only if the tower is ordered complete with sockets)
Protection Class of Electrical Components
IP66
Possibility of Fillable Coverplate
No
Load Class
C250
Macs 4030
The MACs 4030 semi automatic rising power distribution units allow for installations of single-phase and/or three-phase sockets in 16A in accordance with EN 60301-1 EN 60301-2 regulations and related protective circuit breakers. The unit coverplate is in compliance with UNI EN 124 regulations with load class C250.
FEATURES
Tower Material
S235JR Normal Steel
Tower Dimension
400x300mm
Tower Height
600mm
Tower Finish
Anticorrosion Treatment – Color Yellow
Connection Line Couple Out of the Tower
Standard 3m (only if the tower is ordered complete with sockets)
Protection Class of Electrical Components
IP66
Possibility of Fillable Coverplate
No
Load Class
C250
Macs 4040
The MACs 4040 energy distribution units are semiautomatic, with gas actuators for easy lifting. The energy towers allow for installations of single-phase and/or three-phase sockets in 16A, 32A and 63A in accordance with EN 60301-1 EN 60301-2 regulations and related protective circuit breakers. The rising power supply unit coverplate is in compliance with UNI EN 124 regulations with load class C250 or D400.
FEATURES
Tower Material
S235JR Normal Steel – X5CrNi18-10 (AISI 304) Stainless Steel
Tower Dimensions
400x400mm
Tower Height
550mm
Tower Normal Steel Finish
Anticorrosion Treatment – Color Yellow
Tower Stainless Steel Finish
Painting – Yellow Colour
Anticorrosion Treatment (Steel Pit)
Cataphoresis
Connection Lines Couple Out of the Tower
Standard 3m (only if the tower is ordered complete with sockets)
Protection Class of Electrical Components
IP66 – IP67
Class of Load
D400
Possibility of Fillable Coverplate
Optional – Fillable Depth 40mm
Tower Weight with Pit
125Kg
Only Pit Weight
35Kg
Macs 6040
The MACs 6040 energy distribution units are semiautomatic, with gas actuators for easy lifting. With the cover opening 90⁰, the design of the units allows for the cover to be closed during use. The rising power supply units allow for installations of single-phase and/or three-phase sockets in 16A and 32A in accordance with EN 60301-1 EN 60301-2 regulations and related protective circuit breakers, and with a coverplate that is in compliance with UNI EN 124 regulations, with load class D400.
FEATURES
Tower Material
Pearlitic Cast Iron
Tower Dimension
710x480x450mm
Tower Height
535mm
Tower Finish
Anticorrosion Treatment – Color Grey Anthracite
Connection Lines Couple Out of the Tower
Standard 3m (only if the tower is ordered complete with sockets)
Protection Class of Electric Components
IP66
Possibility of Fillable Coverplate
No
Load Class
D400
Macs 8050
The MACs 8050 energy distribution units are semiautomatic, with gas actuators for easy lifting. With the cover opening 90⁰, the design of the units allows for the cover to be closed during use. The rising power supply units allow for installations of single-phase and/or three-phase sockets in 16A and 32A in accordance with EN 60301-1 EN 60301-2 regulations and related protective circuit breakers, and with a coverplate that is in compliance with UNI EN 124 regulations, with load class D400.
FEATURES
Tower Material
Pearlatic Cast Iron
Tower Dimension
820x520x500mm
Tower Height
675mm
Tower Finish
Anticorrosion Treatment – Color Grey Anthracite
Connection Lines Out of the Tower
Di Serie 3m (only if the tower is ordered complete with sockets)
Protection Class of Electric Components
IP66-IP67
Possibility of Fillable Coverplate
Standard
Class of Load
D400
Gaspo 254
The Gaspo 254 lift assisted manual rising power supply unit allows for installation of two single-phase sockets in 16A. The rising energy unit comes with a traffic resistant cover and is easily operated with a special key. The tower is 200mm diameter and 485mm high.
FEATURES
Tower Dimension
200mm diameter
Tower Height
485mm
Tower Finish
Anticorrosion Treatment – Color Yellow
Speak to the Bollard Experts!
Request A Free, No Obligation Callback
For information on the data we collect, please see our privacy policy.
© 2024 MACS | All Rights Reserved | Privacy Policy | Website Terms